Call Us:1-300-132-202

MIROTHANE PU 5626 Pigmented Undercoat

MIROTHANE PU 5626 is a premium grade, high solids, low viscosity polyurethane undercoat. It is very easy to sand and provides an excellent base for MIROTHANE PU topcoats. MIROTHANE PU 5626 provides excellent DOI (Distinction of Image) when topcoated with a MIROTHANE PU topcoat gloss. The excellent moisture resistance of MIROTHANE PU 5626 makes it an ideal choice for harsh or commercial environments e.g. kitchens, interior marine and commercial furniture & fixtures.

  • Easy to sand, powders easily making it ideal for hand sanding
  • High solids, low viscosity provides superior build with minimal thinning. Excellent for sealing the fibres of MDF.
  • Superior chemical and moisture resistance
  • Use up excess MIROTHANE PU 5650  topcoat by adding it into MIROTHANE PU 5626 to create your own tinted undercoat
Colour
White, Black & Tinted
Finish
NA
Build
Very High
Sandability
Excellent
Vertical Hold Up
Excellent
Solvent Resistance
Excellent
Water Resistance
Excellent
Levelling & Flow
Excellent
Sink Back
Minimal
Coverage
6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time
Refer to Technical Data Sheet
Clean Up
Clean all equipment using MIROSOL 1222 or 1286 Thinner
Packaging
4kg (3.4L) & 25kg (17L)
Product Code
5626-A
  1. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
  2. Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
  3. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
  4. Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).
  • Interior use. Doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture.