Call Us:1-300-132-202
Download Data Sheet

MIROTHANE PU 5610 Pigmented Topcoat

MIROTHANE PU 5610 is a high performance, two pack, acrylic modified polyurethane coating. This is a high gloss polyurethane which has superior coverage and excellent durability. MIROTHANE PU 5610 also has superior adhesion over a wide variety of substrates.

  • Outstanding durability, gloss and colour retention
  • Excellent opacity, achieve a high gloss finish with minimal coats
Colour
White and Tinted Colours
Finish
Gloss
Build
Good
Sandability
Good
Vertical Hold Up
Good
Solvent Resistance
Excellent
Water Resistance
Excellent
Levelling & Flow
Excellent
Sink Back
Minimal
Coverage
6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time
Refer to Technical Data Sheet
Clean Up
Clean all equipment using MIROSOL 1222 or 1286 Thinner
Packaging
1-16L
Product Code
5610-9A
  1. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
  2. Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
  3. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
  4. Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).
  • Petrochemical industry, road tankers, tank farms, marine environment, concrete mixing bowls, trailers, horse floats, truck chassis, automotive, CFC toilet partitions.