MIROTHANE PU Polyurethane 5588 Clear Topcoat

Specifications
Surface Preparation
Application
Where to Use

Colour

Clear

Finish

Satin (30%)

Build

Very Good

Sandability

Very Good

Vertical Hold Up

Good

Solvent Resistance

Very Good

Water Resistance

Very Good

Levelling & Flow

Excellent

Sink Back

Minimal

Coverage

6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated

Dry Time

Refer to Technical Data Sheet

Clean Up

Clean all equipment using MIROSOL 1222 or 1286 Thinner

Packaging

4L & 20L

Product Code

5588-3A

Mixing Ratio (by volume)

4 Parts 5588 Part A + 1 Part 5747 Part B (4A:1B) or 10 Parts 5588 Part A + 1 Part 5715, 5728, 5735 or 5757 (10A:1B)

Pot Life

4-6 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job.

Thinning

Thin 20-40% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 (Slow)

Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).

Interior use only. Domestic furniture, commercial joinery and kitchen cabinets

MIROTHANE PU 5588 Clear Topcoat