Call Us:1-300-132-202
Download Data Sheet

MIROTHANE PU 5577 Sun Shield Clear Topcoat

MIROTHANE PU 5577 is a high performance, clear, two pack, non yellowing, acrylic polyurethane for interior wood & wood composites. MIROTHANE PU 5577 Sun-Shield contains a sophisticated package of UV absorbers and light stabilisers that have been proven highly effective in protecting reconstituted, dyed and natural wood veneers from colour change when exposed to ultraviolet (UV) light.

  • Contains UV absorbers and light stabilisers that have been proven highly effective in protecting reconstituted, dyes and natural wood veneers from colour change when exposed to ultraviolet (UV) light.
  • High solids means less coats are required to achieve a full finish
  • Subdued gloss is highly resistant to unsightly oily finger prints. Fingerprints can be easily removed with a clean rag without leaving residual gloss spots, particularly important when applying a clear matt topcoat over a dark base
  • Available in a full range of gloss levels; matt, satin, semi-gloss and full gloss
Colour
Clear
Finish
Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss
Build
Very Good
Sandability
Good
Vertical Hold Up
Good
Solvent Resistance
Very Good
Water Resistance
Excellent
Levelling & Flow
Excellent
Sink Back
Minimal
Coverage
6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time
Refer to Technical Data Sheet
Clean Up
Clean all equipment using MIROSOL 1208 or 1234 Thinner
Packaging
4L & 20L
Product Code
5577-1A (Matt 10%) 5577-3A (Satin 30%) 5577-6A (Semi Gloss 60%) 5577-9A (Full Gloss)
  1. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
  2. Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
  3. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
  4. Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).
  • Interior: Reconstituted, dyed and natural wood veneers, kitchen cupboards, wall panelling, table topcoat, bench tops, commercial furniture and fit-outs, window furnishings and blinds, children’s toys.
  • Semi Exterior: Covered entry doors and internal faces of opening windows.
  • Exterior: When used as a protective clear topcoat over an exterior grade pigmented basecoat e.g. MIROTHANE PU 5610 polyurethane on metal, plastic or over appropriately primed carbon fibre.