Call Us:1-300-132-202

MIROTHANE PU 5533 Clear Sealer

MIROTHANE PU 5533 is a user friendly, two pack, clear, polyurethane sealer that provides an excellent sanding base for clear polyurethane topcoats. Fast drying, with excellent free sanding means reduced time between coats.

  • Easy sanding ensures reduced time to sand and the best possible surface for top coating
  • Excellent flow and levelling
  • Economical, a furniture grade polyurethane sealer that results in a high quality finish when used with MIROTHANE PU 5588 Clear Topcoat
Colour
Milky in can dries clear
Finish
NA
Build
Good
Sandability
Very Good
Vertical Hold Up
Good
Solvent Resistance
Very Good
Water Reistance
Excellent
Levelling & Flow
Excellent
Sink Back
Minimal
Coverage
8m2 per litre at 125 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time
Refer to Technical Data Sheet
Clean Up
Clean all equipment using MIROSOL 1222 or 1286 Thinner
Packaging
20L
Product Code
5533-A-20
  1. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
  2. Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
  3. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
  4. Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).
  • Interior use only. Domestic furniture, commercial joinery and kitchen cabinets.