Call Us:1-300-132-202

MIROTEC WB 8022 Clear Sealer

A clear, single pack, water based sealer that is easy to apply, low yellowing and easy to sand.

  • Single pack, no pot life issues to manage and less waste of product
  • Easy to sand, powders easily ensuring the quickest time to sand
  • Water white and low yellowing, it is ideal for use over blonde timbers and liming stain
  • Good build, to further minimise the risk of sink back and tannin bleed, apply MIROTHANE PU 5500 Clear Isolator as a first coat on bare wood
  • Low VOC (solvent content), non flammable, low odour, safer for workers and the environment
  • Formaldehyde free, zero formaldehyde emissions in rooms in which coated articles are installed or used
  • Isocyanate free, does not require air assisted face masks or other respiratory personal protective equipment for application
  • Pthalate free, it is ideal for children’s toys
  • Complies with Green Building Council Australia: Green Star – Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings
Colour
Water white
Build
Good
Sandability
Excellent
Vertical Hold Up
Very Good
Solvent Resistance
Good
Water Resistance
Good
Levelling & Flow
Excellent
Sink Back
Minimal
Coverage
7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time
Refer to Technical Data Sheet
Clean Up
Clean all equipment with water following use
Packaging
5L & 20L
Product Code
8022
  1. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
  2. Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
  3. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
  4. Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).
  • Interior use only. Ideal for domestic and commercial furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration.