MIROSTAIN 2013 Dye Stain - Slow Dry (Solvent Based)

• Universal application, can be applied by spraying, wiping, brushing or dipping
• Slow dry speed, makes it suitable for application during hot weather
• Excellent light stability for a dye stain thereby providing more consistent and fade resistant colours
• Can be added to MIROCAT PC, MIROBILD AC, and MIROTHANE PU Clear Coatings for toning and shading to improve colour, depth and consistency

Colour (Tint Strength) : TV - Ultra String Tint TX - Strong Tint TY - Medium Tint TZ - Light Tint
Coverage : The coverage is determined by the application method and the strength of colour required
Dry Time : Refer to Technical Data Sheet
Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner
 

Data Sheet

Safety Data Sheets

Mirotone Warranty Information

Thinning : MIROSTAIN 2013 is supplied ready for use (RFU). However to achieve lighter tones reduce with MIROSOL 1220 (Fast), MIROSOL 1294 (Medium) or 1242 or 1218, 1260 (Slow) thinners.
Toning : If required, to provide extra depth of colour, add up to 10% by volume to MIROCAT PC or MIROBILD AC coatings. Apply in light even coats over sealed timber to obtain depth of colour.
 

Pad or Rag - Use a clean lint free cloth, apply in even strokes.
Suction Gun - Use 1.5mm (59 thou) orifice with 280kpa (35 psi). It is important not to apply MIROSTAIN above this pressure to avoid dark or blotchy discolouration.
Pressure Pot - Use 1mm orifice with pressure pot air-cap. Gun pressure 280kpa (35 psi) and a pot pressure of 16kpa (2 psi) max.
Airless Spray - Contact Mirotone’s Technical department.
Air Mix Guns - Contact Mirotone’s Technical department.

Interior use only. Interior use only. Pine furniture, architraves and skirting boards, internal doors, built-in wardrobes and joinery and fixtures.