To maximise UV protection of the substrate it is essential that MIROSHIELD 3900 is added to all the layers in the coating system, including isolators, sealers and topcoats.
Addition to Single Pack Products - Add MIROSHIELD 3900 UV Absorber Additive into the single pack of the selected clear coating and mix thoroughly. Thin as required, mix thoroughly and then apply per directions on the appropriate product Data Sheet. Apply in even wet coats to achieve a uniform finish.
Addition to Two Pack Products: Mix Part A and Part B per relevant Data Sheet and mix thoroughly. Then add MIROSHIELD 3900 UV Absorber Additive per the table above. Thin as required, mix thoroughly and then apply as per directions on the appropriate product Data Sheet. Apply in even wet coats to achieve a uniform finish. Note: The addition of MIROSHIELD 3900 UV Absorber will reduce the viscosity and this will need to be considered before thinning further.