Call Us:1-300-132-202
Download Data Sheet

MIROLAC NC 3125 Universal White Undercoat

MIROLAC NC 3125 is an extremely fast drying, single pack, pigmented undercoat for internal wood and medium density fireboard (MDF). It is aromatic free and contains no formaldehyde or phthalates making it safer for the user and environment. With excellent sanding properties it is an ideal base to be top coated with a variety of topcoats.

Colour
White
Finish
NA
Build
Very Good
Sandability
Very Good
Vertical Hold Up
Very Good
Solvent Resistance
Resists splash and spillage of mineral turps but has poor resistance to industrial solvents
Water Resistance
Fair
Levelling & Flow
Excellent
Sink Back
Minimal
Coverage
6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time
Refer to Technical Data Sheet
Clean Up
Clean all equipment using MIROSOL 1222 or 186 Thinner
Packaging
4kg (3.6L) 20kg (17L) 205kg (184L)
Product Code
3125
  1. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
  2. Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
  3. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
  4. Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).
  5. Curtain Coating - 40-60 seconds viscosity with applied wet film thickness of 150 microns.
  • Interior use only. Ideal for domestic furniture, internal doors, children’s toys and furniture, picture frames, musical instruments, MDF building products and peg boards for display areas. When top coated with MIROBILD AC topcoats or MIROTHANE PU topcoats this product may be used on kitchen cabinets and commercial furniture.