Call Us:1-300-132-202

MIROCAT PC 3242 Clear Sealer

MIROCAT PC 3242 is a high performance, single pack, precatalysed sanding sealer that provides an excellent base for a range of Mirotone topcoats. The rapid drying time and excellent free sanding ensure reduced down time between coats.

  • High build provides improved hold up and reduces the number of coats required
  • Easy to use, achieve an excellent finish with minimal effort
  • Isolate waxes in medium density fibreboard (MDF) reducing wax extraction
  • Fast drying allows early sanding which minimises production time
  • May be tinted to a black undercoat
Colour
Turbid in can, dries clear
Finish
NA
Build
High
Sandability
Excellent
Vertical Hold Up
Very Good
Solvent Resistance
Good
Water Resistance
Good
Levelling & Flow
Excellent
Sink Back
Minimal
Coverage
6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated.
Dry Time
Refer to Technical Data Sheet
Clean Up
Clean all equipment using MIROSOL 1222 or 1286 Thinner
Packaging
4L & 20L
Product Code
3242
  1. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
  2. Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
  3. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
  4. Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).
  • Interior use only. Ideal for domestic furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration.