MIROCURE UV Roller Coat Applied

Mirotone has a wide range of MIROCURE UV coatings suitable for application by roller coater.

Typical applications: wall panelling and timber flooring.

MIROCURE UV 7301 Clear Balsa Sealer

A solvent based clear primer designed for roller coat application as a first coat to pre-sanded wood. MIROCURE UV 7301 has been specially formulated to seal and protect end grain Balsa. MIROCURE UV 7301 maintains the natural colour of the wood without excessive darkening.

MIROCURE UV 7301 must be dried by IR/airflow before curing under ultraviolet (UV) light. MIROCURE UV 7301 provides excellent adhesion to Balsa and most other species of wood.

Typical applications: sealing end grain balsa, internal doors, hard wearing panel work, wood based building products e.g. wall panels, MDF sheets.

MIROCURE UV 7502 Water Based Clear Primer

A high solids, water based clear primer designed for roller coat application as a first coat to pre-sanded wood. MIROCURE UV 7502 must be dried by IR/airflow then ideally cured under ultraviolet (UV) light prior to application of MIROCURE UV sealer coats.

MIROCURE UV 7502 provides good wetting and adhesion to most species of wood. In cases where MIROCURE UV 7502 does not provide adequate adhesion, Mirotone recommends that MIROCURE UV 7760 plus MIROCURE UV 7901 Adhesion Promoter be evaluated as an alternative primer system.

Typical applications: engineered and solid wood flooring, internal doors, hard wearing panel work, wood based building products e.g. wall panels, MDF sheets.

MIROCURE UV 7727 Clear Topcoat

A high performance clear UV topcoat suitable for engineered and solid wood flooring and wooden articles that require a durable, hard-wearing surface. MIROCURE UV 7727 is a non-ceramic coating that displays excellent scratch and abrasion resistance and is highly resistant to white marking. Due to its ability to be recoated, MIROCURE UV 7727 is ideal for high quality engineered timber floors which are intended to be maintained over a long in-service life.

MIROCURE UV 7727 is available in a full range of gloss levels from Ultra Matt all the way through to Full Gloss. The Ultra Matt results in a natural "uncoated" appearance with outstanding abrasion resistance. It can be used to simulate the appearance of an oil finish but, compared to an oil, has far superior in-service durability.

MIROCURE UV 7727 Ultra Matt has excellent water repellence for a matt coating. Note: The degree of water repellence is dependent upon total applied film weight and sealer selection. For interior use only.

Typical applications: engineered and solid wood flooring, internal doors, hard wearing panel work.

MIROCURE UV 7735 Clear Roller Coat Sealer

An easy to sand, low cost, UV curable sealer, which is designed to be applied by a purpose built roller coater. MIROCURE UV 7735 is compatible with most timbers, for improved adhesion on dark, stained or oily timbers Mirotone recommends using MIROCURE UV 7751 as the first sealer coat. MIROCURE UV 7735 is suitable for application over timber that has been sealed with either itself or with MIROCURE UV 7751. For interior use only.

Typical applications: wall panelling, flat panel work, internal doors.

MIROCURE UV 7737 Clear Topcoat

A ceramic, clear UV topcoat suitable for hard wearing floor and wood panels. MIROCURE UV 7737 displays good mar and abrasion resistance. For interior use only.

Typical application: solid wood flooring, hard wearing panel work.

MIROCURE UV 7750 Clear Sealer

An easy to sand, UV curable sealer. MIROCURE UV 7750 may be overcoated with MIROCURE UV 7735 Clear Sealer or MIROCURE UV 7719 Clear Topcoat. MIROCURE UV 7750 may be toned with MIROCURE UV 7803 colourants to achieve a wide range of stain colours. For interior use only.

Typical applications: venetian blinds, wall panelling, flat panel work, internal doors.

MIROCURE UV 7751 Clear Sealer

An easy to sand, UV curable sealer for application directly onto the wood surface. MIROCURE UV 7751 displays excellent adhesion and grain filling over wood and is particularly suitable for dark, stained or oily and otherwise difficult to coat wood substrates. MIROCURE UV 7751 can be overcoated with both clear and pigmented UV coating systems. For interior use only.

Typical applications: venetian blinds, wall panelling, flat panel work, internal doors

MIROCURE UV 7756 High Viscosity Clear Sealer

A high build sealer typically used to fill open grain in wood. For interior use only.

Typical applications: engineered and solid wood flooring, internal doors, hard wearing panel work.

MIROCURE UV 7759 Clear Sealer

An easy to sand, UV curable sealer for application directly onto the wood surface. MIROCURE UV 7759 displays excellent adhesion and grain filling over wood and is particularly suitable for dark, stained or oily and otherwise difficult to coat wood substrates. The adhesion of MIROCURE UV 7759 to wood can be further enhanced with the addition of MIROCURE UV 7901 Adhesion Promoter. MIROCURE UV 7759 can be overcoated with both clear and pigmented UV coating systems.

Typical applications: venetian blinds, wall panelling, flat panel work, internal doors.

MIROCURE UV 7760 Clear Primer

Designed to be applied as the first priming sealer directly onto bare wood and displays excellent adhesion and grain filling properties. For interior use only.

Typical applications: engineered and solid wood flooring, internal doors, hard wearing panel work.

MIROCURE UV 7841 White Undercoat

A white UV curable undercoat that is applied by purpose built roller coater for use on closed grain timber in low wear areas such as venetian blinds and wall panelling. For interior use only.

Typical applications: venetian blinds, wall panelling, flat panel work, internal doors.

MIROCURE UV 7852 White Topcoat

A high performance white UV topcoat suitable for venetian blinds, shutters, wall panelling and other flat wood panels. MIROCURE UV 7852 displays excellent scratch and abrasion resistance. MIROCURE UV 7852 is a bright clean white which requires fewer coats to reach optimal opacity. The low yellowing properties makes this product ideal for window furnishings. For interior use only.

Typical applications: venetian blinds and shutters, wall panelling, flat panel work, internal doors.

MIROCURE UV 7858 White Undercoat

A UV cured undercoat that is designed to be applied by purpose built roller coater. MIROCURE UV 7858 is ideal for use on closed grain timber in low wear areas such as venetian blinds and wall panels. For interior use only.

Typical applications: venetian blinds and shutters, wall panelling, flat panel work, internal doors.