|
|
|
|
|
|
A Guide to Problem Solving - The Application of Interior Wood Coatings |
|
 Home/Group/English/PRODUCTS/Problem Solving Guide |
|
| Colour appears uneven and non uniform. | |
|
|
|
| Uneven sanding of the substrate with coarse sandpaper. | |
|
Use 180 or 240 grit sandpaper on an orbital sander to achieve a uniform base or if sanding by hand always sand with the grain of the wood. | |
| Uneven stain application. | |
| Apply the stain in an even wet application. Remove excess stain with a clean lint free cloth to achieve a uniform finished colour. | |
| Stain applied too dry or with a thinner that dries too fast. | |
| Always use the correct thinner for the application technique. A slow thinner is required when a stain has to be wiped even over large areas. Apply the stain in a wet application using low air pressure. | |
Back to Problem Solving Guide
| Disclaimer: The recommendations above are based on data from Mirotone’s own research and information from others whose work we believe to be reliable. Due to possible differences in actual application methods and conditions, users must satisfy themselves that the end result meets their requirements. | |
|
|
|
|
|
|
| |
|
|