|
|
|
 Home/Group/English/PRODUCTS/Mirotone In-situ Floor Coatings |
|
Solvents, Thinners & Additives |
|
|
|
| Super Cleaning Solvent 1213 |
| Super Cleaning Solvent 1213 is a blend of solvents formulated for cleaning tools used in the application of polyurethane. It is suitable for cleaning DURAPOL® Moisture Cure, POLYTHANE® Two Pack Polyurethanes & CRYSTAPOL® Non Yellowing coatings. | | |
|
| Thinners 1210 |
| Thinners 1210 has been formulated for use with Mirotone's polyurethane coatings i.e. DURAPOL® Moisture Cure, POLYTHANE® Two Pack Polyurethanes & CRYSTAPOL® Non Yellowing coatings. It is used primarily to enhance the flow characteristics of the polyurethane but can be used under conditions that may be considered abnormal for standard applications (see Data Sheet for further information). It may also be used for cleaning equipment. | | |
|
| Wet Edge Extender 1211 |
| Wet Edge Extender 1211 is a blend of volatile solvents formulated to enhance the flow characteristics of Mirotone polyurethane coatings. It is used when very high/low temperature and/or humidity and/or dry windy atmospheric conditions are present. Wet Edge Extender 1211 is also used where a large floor area is to be coated requiring maximum wet edge time. | | |
|
| Sureflow Additive 5980 |
| Sureflow Additive 5980 is a ready to use flow additive. When added into DURAPOL® Moisture Cure coatings, in the recommended ratio, this additive will minimise the rejection problems normally caused by wax, oils and other common household contaminants. | |
|
| |
|
|
|
|
|
|
|
|
|
|