| MIROTEX Universal Texture Additives 3934/3937 |
|
|
| Viewing & Printing Data Sheets |
Summary Data Sheet
If you are not "Logged In" you will only be able to view and print the Summary Data Sheet for this product (information linked to the "Brown Quick Links" below).
Full Version Data Sheet
In order to view and print the Full version of this Data Sheet (including the information linked to the "Blue Quick Links" below) you must "Log In".
If you do not have "Log In" details please click "Apply for Log In". |
| |
|
|
|
|
| MIROTEX Universal Texture Additive 3934/3937 |
|
|
 |
Important Information
Mirotone only warrants the quality of the product in the can. It is your responsibility as the user, before application, to ensure that the coating system meets your requirement and is fit for the intended purpose. | |
|
|
|
| Product Description |
| MIROTEX Universal Texture Additives are versatile texture additives that can be added to Mirotone's MIROLAC NC, MIROBILD AC or MIROTHANE PU topcoats. MIROTEX is easy to apply and is available in either Fine (3934) or Coarse (3937) which allows you to acheive your desired finish. | |
|
|
| Features & Benefits |
| MIROTEX Universal Texture Additives can be used with a selected range of Mirotone's nitrocellulose (MIROLAC NC), acid catalysed (MIROBILD AC) or polyurethane (MIROTHANE PU) coatings. |
| Available in either MIROTEX Fine 3934 or MIROTEX Coarse 3937. |
|
Minimal surface preperation and less coats required to achieve a full finish, thereby saving labour and material costs. |
|
MIROTEX Additives can easily be added to approved products in the Mirotone range to provide a decorative finish. |
| MIROTEX results in a protective finish with a high degree of scratch resistance. |
| Add MIROTEX Universal Texture Additive to your left over colours to use them up and to achieve a unique finish. | |
|
|
| Typical Applications |
|
Dependent upon the Mirotone topcoat used. Refer to the appropriate topcoat data sheet for further information.
Compatible topcoats:
- MIROLAC NC 3150
- MIROBILD AC 3750 & 3770
- MIROTHANE PU 5605
- MIROTHANE PU 5608
- MIROTHANE PU 5610
- MIROTHANE PU 5650
| |
|
|
| Application Methods |
|
Add the MIROTEX Additive to the single pack or Part A Base of the selected topcoat and mix thoroughly. Once mixed add the appropriate Part B hardener or Catalyst. Thin as required, mix thoroughly and then apply as per directions on the chosen topcoat data sheet. Apply in even wet coats to achieve a uniform finish.
Correct mixing is important. Only add to the Part A just before use, do not leave in Part A for any length of time. The pot life of two pack topcoats will be reduced when MIROTEX additive is added. | |
|
|
| Mirotone Accreditations |
Research Laboratory: Mirotone's head office research laboratory in Sydney, Australia holds N.A.T.A. accreditation No. 865 under ISO/IEC 17025:1999 General Requirements for the Competence of Testing and Calibration Laboratories.
N.A.T.A. - National Association of Testing Authorities
Mirotone is N.A.T.A. certified to AS/NZS ISO 9001:2000 Quality Systems for design and manufacturing. | |
|
|
|
| Mixed System Policy |
|
A Mixed System is:
Where any coating or additive manufactured by another coating manufacturer is applied under, between, in, or on top of, coatings manufactured by Mirotone. [Additives may include thinners, retarding solvents, hardeners, flow additives, stains or catalysts]; or
Where products manufactured or supplied by Mirotone are used in a manner not approved or recommended by Mirotone on its labels or Data Sheets.
Policy: Mirotone will not recognise any warranty claim from customers or third parties if any Mirotone product has been used in a Mixed System. Mirotone can only warrant the quality of its own range of coatings when used in strict accordance with the recommended coating systems thinners and additives stated on Mirotone's labels and Data Sheets. | |
|
|
|
| Limitation of Liability |
The information contained in this Data Sheet is based on data appraised in our Laboratories and on our own research, and that of others whose work we believe is reliable. Due to possible differences between controlled laboratory test conditions and methods, and actual application conditions and methods, coupled with possible differences in interpretation of results, the user of this product must satisfy himself that the end result obtainable under his particular application conditions meets his requirements. Special attention is directed to the problem of chemical compatability, as Mirotone can control only the quality and formulation of its own materials. Mirotone has no control over quality, formulation or consistency of other manufacturers' products or the substrate to which its product is applied. Therefore Mirotone supplies its products only on condition that the consumer himself is satisfied as to the performance of the product in meeting his particular requirements. | |
|
|
|